Description | tw5000
injection unit
cylinder head volume(cm3) : 2000, 2260, 2540
shot weight (g) : 1800, 2030, 2280 :
screw diameter (mm): 80, 85, 90
injection pressure(mpa): 168, 149, 133
rate of injection(ps)(g/s): 430 , 480, 540
plastising rate (ps)(g/s): 70, 80, 90
screw speed(rpm): 150
screw length/ diameter ratio(l/d): 21.2, 20, 18.8
clamping unit
clamping force(kn): 5000
max mould opening stroke (mm): 730
distance between the tie bars (mm): 800*710
allowed moukd thickness(mm): 350-750
ejection force(kn): 150
ejection stroke (mm): 185
dia of mould location hole(mm): Φ160h7
sphere diameter of spray nozzle(mm):sr15
nos of liftout rod: 13
max mould-shift speed(m/min): 50
heating capacity of screw cylinder (kw):24.6
pump motor power(kw): 45
oil tank capacity(l): 900
rated pressure of oil pump(mpa): 16
machine dimensions(mm): 7650*1780*2650
machine weight(t): 19 |