vibration meter vm-6360 1. features * in accordance with iso 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines. * specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes. * individual high quality accelerometer for accurate and repeatable measurements * bearing condition monitoring function * lcd digital display * lightweight and easy to use * wide frequency range (10hz. to 10khz.) in acceleration mode * automatic power shut off to conserve power. * ac output socket for headphones and recording. *optional headphones for use as electronic stethoscope. *optional software and cable for rs232c interface. 2．specifications display：4 digits, 18 mm lcd measured values and makers (units, 10,and battery symbol) transducer : piezoelectric accelerometer parameters measured: (determined by the type) standard type: velocity, acceleration, and displacement multi functional type: rpm and frequency besides parameters measured by the standard type. its ranges are 2 times as wide as those of above 2 types. measuring range : velocity : 0.01-19.99 cm/s true rms 0.000-7.870 inch/s acceleration : 0.1-200.0m/s equivalent peak 0.3-656.2 ft/s displacement : 0.001-2.000mm 0.04-8.0 inch , equivalent pk-pk rpm (r/min) : 60-99,990 r/min readings should be multiplied by 10 if the display show '10'. frequency: 1-20 khz frequency range for measuring acceleration : 10hz. to 1khz. in '1' mode 1khz. to 10khz. in '10' mode for bearing condition check velocity : 10hz. to 1khz. displacement : 10hz. to 1khz. accuracy: ?5%+2 digits metric/ imperial conversion output: ac output 2.0v peak full scale (load resistance: above 10k) pc interface: rs232c interface ( cable and software is not included) power supply: 4x1.5 aaa size (um-4) batteries power off : 2 modes manual off at any time or auto power off after 5 minutes from last key operation operating conditions: temperature : 0-50 ℃ humidity : below 90% rh dimensions: 124x62x30mm/4.9x2.4x1.2 inch weight: 120g (not including batteries) accessories included : powerful rare earth magnet 1 pc. carrying case 1 pc. operation manual 1 pc. optional accessories: headphones for use as electronic stethoscope cable and software for rs232c